Skip to main content
Wispr Flow handles the transcription, Vox provides the microphone and the button.
1

Turn off Vox dictation

Otherwise both tools transcribe at once. See Use another dictation tool instead.
2

Set Vox as Wispr Flow's microphone

In Wispr Flow, open Settings and set the input device to Vox. See Use Vox as a microphone anywhere.
3

Note Wispr Flow's activation key

Wispr Flow activates on a held key by default. TODO: confirm the current default and whether it can be changed to an arbitrary combination.
4

Map a Vox button to it

In Vox, open Buttons and set a press to send that key. See Map shortcuts to your buttons.
Wispr Flow’s default trigger is a held key rather than a tap. A Vox button press sends a key down and key up together, which may register as a tap instead of a hold.TODO: this is the crux of the integration and needs testing. If a press does not work, check whether Wispr Flow has a tap-to-toggle mode and recommend that instead.

​
Troubleshooting

Likely the hold vs tap problem above. Switch Wispr Flow to a toggle trigger if it offers one.
Check that Vox is connected and that Wispr Flow has microphone permission.
Vox dictation is still on. Turn it off.